Video mixer ROLAND VR-50HD

• Processing
  4:04:04 (RGB), 10-bit
  4:02:02 (Y / Pb / Pr), 10 bit

• Input connectors
  3G/HD/SD-SDI: BNC type x 4 (input 1 - 4)
  * Conforms to SMPTE 424M (SMPTE 425M-AB), 292M, 259M-C HDMI (DVI-D): Type A (19pin) x 4 (input 1 to 4
  * HDCP supported. the
  analog RGB / HD-component: Mini D-Sub 15-pin type x 2 (input 1 - 2)
  analog video (SD): composite (BNC type) x 2 (input 1 - 2)
  * input 1-2.: Select SDI, HDMI or analog RGB, composite using menu.
  3-4 * Input: Select SDI, HDMI using menu.

• output connectors
  3G/HD/SD-SDI: BNC type x 2 (PGM OUT, AUX OUT
  * Conforms to SMPTE 424M (SMPTE 425M-AB), 292M, 259M-C HDMI (DVI-D): Type A (19pin) x 3 ( PGM OUT, AUX OUT, Multi View
  * HDCP Supported analog RGB / HD-component: Mini D-Sub 15-pin type x 2 (PGM OUT, AUX OUT)

• Input / Output level and impedance
  Composite: 1.0 V 75 Ohm
  Analog RGB: 0.7 volts 75 Ohms (H, V: 5 VTTL)
  Analog HD: 1.0 V 75 Ohms (Sync-signal: Bi-Level/Tri-Level)

• Supported video formats

• SDI
  480/59.94 i, 576/50i, 720/59.94 p, 720/50p, 1080/59.94 i, 1080/50i, 1080/59.94 p, 1080/50p
  * Conforms to SMPTE 274M, SMPTE 296M, ITU-R BT.601 -5.

• HDMI (* 2)
  480/59.94 i, 576/50i, 480/59.94 p, 576/50p, 720/59.94 p, 720/50p, 1080/59.94 i, 1080/50i, 1080/59.94 p, 1024 × 1080/50p 768/60Hz ( * 1), 1280 × 720/60Hz (* 1), 1280 × 800/60Hz (* 1), 1280 × 1024/60Hz (* 1), 1400 × 1050/60Hz, 1920x1080/60Hz

• HDMI (MULTI-VIEW output): (* 2)
  1080/59.94 p

• Component
  480/59.94 i, 576/50i, 480/59.94 p, 576/50p, 720/59.94 p, 720/50p, 1080/59.94 i, 1080/50i, 1080/59.94 p, 1080/50p

• RGB (* 2)
  1024 × 768/60Hz (* 1), 1280 × 720/60Hz (* 1), 1280 × 800/60Hz (* 1), 1280 × 1024/60Hz (* 1), 1400 × 1050/60Hz, 1920x1080/60Hz

• Composite.
  NTSC, PAL

• * note
  * 1 output refresh rate is 75 Hz when the frame rate of 50 Hz.
  * 2 Conforms to CEA-861-E or VESA DMT Version 1.0 Revision 11. the
  * video frame rate must match the frame rate of the camera settings.
  * the output Format of HDMI and RGB / component is always the same.
  When the screen mode, component signal is output via the RGB / component connector.
  When the RGB format is selected, RGB signal is output via the RGB / component connector.

• USB VIDEO
  480/29.97 p, 576/25p, 480/59.94 p, 576/50p, 720/29.97 p, 720/25p, 720/59.94 p, 720/50p, 1080/29.97 p, 1080/25p, 1080/59.94 p, 1080/50p

• Still Image
  Windows (R) Bitmap File (. BMP)
  * Maximum 1920 x 1080 pixels, 24 bit per pixel, uncompressed.

Effects
Transition: Mix, Cut, Wipe (9 patterns)
Composition: PinP, Chrominance Key, Luminance Key
Others: Output Fade, Output Freeze, User Logo the

• Audio

• audio Processing
  sampling rate: 24-bit/48 kHz

• Input connectors
  AUDIO IN (1 to 4) connectors (XLR / TRS combo type)
  * XLR Type: 1 GND, 2 hot, 3 COLD
  * phantom power: DC 48 V (without load maximum), 5 mA (maximum load) (current value per channel ).
  AUDIO IN (5 to 8) jacks (RCA type automatically)
  AUDIO IN (9 to 12) jacks (TRS type)

• output connectors
  AUDIO OUT L, R connectors (XLR-3-32)
  * XLR Type: 1 GND, 2 hot, 3 COLD
  AUDIO OUT L, R jacks (RCA type automatically)
  Connector PHONES Jack (stereo 1/4 inch phone type) ( headphones)
  Connector PHONES Jack (stereo miniature type) (headphones)

• Input level and impedance
  XLR / TRS: -68 to +4 dBu (maximum: +22 dB, 4 ohms)
  RCA Phono: -10 dBu (maximum: +8 dB, 11 K)
  TRS: +4 dBu (maximum: +22 dB, 98 com)

• Output level and impedance
  XLR: +22 dB (maximum: +22 dB, 600 Ohm)
  RCA Phono: -10 dBu (maximum: +8 dB, 1 kOhm)
  headphones: 25 mW + 25 mW, 20 Ohms

• Audio format
  SDI: linear PCM, 24 bit, 48 kHz, 2ch
  * SMPTE 299M, SMPTE 272M-C
  HDMI: linear PCM, 24 bit, 48 kHz, 2ch
  USB-AUDIO: linear PCM, 16 bits, 48 kHz, 2ch

• Sound effects
  Channel Effects: Compressor, Noise Gate, 3-Band EQ, Delay
  Master Effects: Mastering, 3-Band EQ, Reverb

• Other

• Remote
  Remote MIDI: 5 pin DIN type (IN, OUT / THRU)
  RS-232C: D-Sub 9 pin type X 1

• USB Interface
  USB2.0 port (host): hi-Speed USB: type A (for USB memory)
  USB3.0 port (device): Type B for USB-VIDEO (Super-Speed/Hi-Speed), USB-AUDIO (Full - Speed)
  - 4:02:02 uncompressed video (Y / Pb / Pr) 8-bit
  - bit Rate: no more than 2 GB / s (1080/59 only.94 p active pixels)
  - UVC (USB Video Class) supported uncompressed video
  Certified USB 3.0 cable is required when working at super-speed (anything at 720p or higher)

• Display
  Graphic 7 inch color LCD resolution 800 x 480 dots (touch screen)

• Power
  AC Adaptor DC 24V Secondary AC adaptor DC 9 V to 16 V (XLR-4-32)

• Ampacity
  2,5 a (24V DC)

• working temperature
  +0 To +40 +32 degrees Celsius to +104 degrees Fahrenheit

• Accessories
  AC Adapter, power cable, user manual

• System recommendations for recording (VR Capture) or streaming HD material

• Windows
  8.0 or higher

• Mac
  OS X 10.7 and above

• General
  Ivy Bridge Core i7 and higher
  8 GB of memory or more
  USB 3.0 (USB 3.0 supported Intel Chipset e.g. 7Series)
  note: USB controller chip Renesas (previously NEC) is not suitable

Dimensions and weight

• Width: 434 mm
  Depth: 306 mm
  Height: 149 mm
  Weight: 5.3 kg

• notes
  * 0dBu = 0.775
  * This product is a digital device under FCC class A Part 15.
  * In the interest of product improvement, the specifications and / or appearance are subject to change without prior notice.
  * This product is intended for use in the following electromagnetic environments: E1: residential, E2: trade and light industrial, E3: urban outdoors, E4: controlled EMC environment, ex. Studio (broadcasting Studio) which are specified in EN55103-1 and EN55103-2.